Decorative plaster is applied to a pre -prepared wall. The surface is cleaned of the previous coating, whether wallpaper or paint. All irregularities and small holes are also put up and are embedded. In order for the plaster to lie down better and the walls are covered with a special primer of deep penetration. The finish layer of putty is not necessary, but if there is an opportunity and desire, then you can. The finished solution of decorative plaster is applied to several layers. The very first layer is the very thin and applied using a conventional roller. If the plaster is fine -grained, then you can apply a pneumatic sprayer. The layer should evenly lie on the entire surface of the wall. After the first layer is completely dry, the rest of the layers are applied.