Features of laying parquet -

Features of laying parquet -

Parquet laying can be performed if there is a strong screed. The surface must be checked for humidity. Indicators should not exceed 2%. A special device is used to measure humidity. The surface is primed with a solution of glue and leave to dry. If the level of surface humidity is 2-4%, it is necessary to equip a waterproofing barrier. To do this, apply several layers of primer. The first layer is sprinkled with quartz sand. Then lay the plywood on top. The material should have a moisture resistant coating. Sheets are sawn into the same parts. When laying parquet, rivets are placed at an angle of 40 degrees. Each riveting is fixed with a nail to increase the strength of the connection. After the glue dries up, the parquet cycles begin. The surface is skipped with sandpaper with grain size 60. Then take sandpaper with granularity of 120. Parquet is polished in the direction perpendicular to the previous. The surface needs to be polished, at least three times. Now the surface needs to be covered with varnish. The choice of paintwork is determined by the purpose of the parquet. Before varnishing, the parquet is putty and applied a primer. Also, instead of varnish, parquet can be treated with special oil. Such compositions are usually used in rooms with a high risk of erasing varnish from the surface.