Строительство » The total thickness of the concrete layer is usually 0.2 m.
Новости
Лента свежих новостей
http://instukzia.com/24497-gde-primenyayutsya-promyshlennye-stancii-pedrollo-i-ih-vidy.html http://instukzia.com/24545-kak-pravilno-vypolnit-zamenu-ekrana-na-iphone-14.html http://instukzia.com/24618-varianty-i-sposoby-ekonomii-na-pokupke-produktov-pitaniya-i-edy.html

The total thickness of the concrete layer is usually 0.2 m.


  • 4-02-2019, 17:25

Now the stage of filling the floor and walls is coming. Stones are poured to the bottom of the pool, and a reinforcing mesh is laid out on them. On top it is poured with concrete. The total thickness of the concrete layer is usually 0.2 m. The bottom is made with a slight slope to the place of water drain. The entire perimeter of the pit is decorated with good wooden formwork. High -quality installation will provide wall strength and attractive appearance of the pool. To strengthen the wall between the formwork and the ground, a special mesh is installed, then liquid concrete is poured on top. After the concrete solution is hardened, the formwork is removed, the walls and floor are processed with cement milk.



Поделись с друзьями:
Нравится
Похожие публикации
Обзор лучших бюджетных игровых компьютеров Обзор лучших бюджетных игровых компьютеров
Types of formwork by purpose Types of formwork by purpose
Then processed with a metal brush, giving roughness. Then processed with a metal brush, giving roughness.
In large fountains, water enters at a speed of 150 Lsek. In large fountains, water enters at a speed of 150 Lsek.
In recent years, such milk has become very widespread. In recent years, such milk has become very widespread.


Новый Комментарий:
Ваше Имя:
Ваш E-Mail:

Введите два слова, показанных на изображении: