Ballic Nissan Kashkai - a simple replacement process

Ballic Nissan Kashkai - a simple replacement process

On Nissan Kashkai replacement of ball support - the process is very energy -intensive and requiring attention. At first glance, it may seem difficult to complete the task, but only at first glance. The ball support Nissan Kashkai is changing after a thorough check. During the performance of the work, the drive shaft nut is initially turned away, this process is necessary after the car is installed on the supports. Phased replacement. Weakening the nuts of the wheel and raising the car, the twelve -sided nut of the shaft weakens, after which the shaft is separated from the wheel hub. Then all the bolts of fastening the shaft flange from the gearbox are disconnected. The shaft is removed, and the positions of the heads of the bolts are also marked, then they turn out. Next, along with the persistent shock absorber, we turn the wheel hub fixing them with a beam. Putting the nut from the bolt with a ball head, while following the clear docking of the end of the nut with the end of the bolt. Following from the rotary fist, it is necessary to squeeze out the bolt. Installation of Sharova Nissan Kashkai. Next is the installation of a ball joint. A ball joint is inserted into the rotary fist, after which a new nut is screwed up and tightened properly. Please note that you have to use a fabric wrench, and also at the time of tightening the nut to monitor the bolt does not turn (for this a shortened hexagonal key can be used, in view of the fact that other means will not be done due to the complexity of the location). In the next stage, it is necessary to remove a wooden beam that hold the shock absorber strut. Then the shock absorber stand returns to the original position. Also, we adhere to the half -breeze with a wheeled hub and carry out a joining with a flange of the gearbox. Next, we tighten the previously marked bolts. It is displayed in the necessary position on the inside of the drive shaft, tighten the bolts, and then the nuts of the wheels, having previously lowered the car. In general, that’s all, the main thing should be remembered about the importance of performing these manipulations, checking, and then recruiting all your performed actions and the correctness of tightening the bolts, as well as nuts.